Can't get connector disconnected

2 replies to this topic
  • Spiritwalker2222

Posted February 07, 2011 - 09:23 PM


I can't figure out how I'm suppose to disconnect this connector. :thumbsup:

The connector is just above the engine, and connects the magneto to the computer. Here's a pic.



Any help is appreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Birdy426

Posted February 07, 2011 - 09:43 PM


In the first picture, there's a little tab under the "flat" on the connector. Push it down to release the clip and pull the connector apart. You may need to use a small screwdriver to push the tab down far enough...

  • Spiritwalker2222

Posted February 08, 2011 - 10:24 AM


Turns out that the tab is part of the outer connector not the inner. :thumbsup:

After lifting the tab the connector came off.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.