rear suspension/sliders and rail tips


4 replies to this topic
  • 04kx250monsterenergy

Posted 25 January 2011 - 02:31 PM

#1

put new sliders and rail tips on my sled today. put 10 miles on and the rail tips are already showing alot of wear. i had the rear of my skids suspension jacked up pretty good so i softened it up hoping itll help? if not i plan on tightening the limiter straps up front. if anyone else has any sugustions please help.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • SnowMule

Posted 25 January 2011 - 10:51 PM

#2

Track tension's not too tight.... is it?  

Is it wearing evenly, or is one side worse than the other?

  • 04kx250monsterenergy

Posted 26 January 2011 - 06:32 AM

#3

no its not to tight. and yes its fairly even

  • XC700116

Posted 26 January 2011 - 07:19 AM

#4

Year, make and model? Modifications?

  • 04kx250monsterenergy

Posted 27 January 2011 - 07:36 AM

#5

its a 03 f7 efi fairly stock some gearing and a can. i fixed the problem though the rear end of my skid was to jacked up had the springs on the hardest block so i stepped them down a bit and now the rail tips haven't showed any more noticeable wear




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.
Register Close

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!