106 replies to this topic

[Throttlejockey Get Help Now]

Post away.

[TDC51 TT Addict]

Must have: EFI MAPPING SWITCH

You can can save money on a pipe by getting this swtich and activating the aggressive map on the 2011 250/350..Combined with an aftermarket pipe, these together provides the best overall gains. For $50, I'd suggest starting here first.

http://motocrossacti...F-HAS-7497.aspx

Edited by rickk, 08 January 2011 - 01:38 AM.

[TDC51 TT Addict]

WWW.Antigravitybatteries.com

[TDC51 TT Addict]

-fmf (solid gains on the 350)

-yoshimura (solid gains on the 350)

-ktm (akrapovic- spreads the powerband and the ti saves weight on the 350)

-dr.d

[TDC51 TT Addict]

Next to the $50 map switch, this is another "best bang for the buck" item. $50 and you'd swear you just installed an $900 full exhaust. For advanced/fast riders.

http://www.g2ergo.com/

Edited by rickk, 08 January 2011 - 08:52 AM.

[racertodd TT Bronze Member]

Sicassracing.com   Offers maping plugs wild and mild plug them in under the seat and set it and forget it 24.95 or they have the bar mount switch mild,stock or wild it also has intergrated kill switch to save space on the bar for 79.95

From what I have heard you have to shut the bike off to switch maping and restart. I guess you are not able to do it on the fly

[TDC51 TT Addict]

[kereams TT Bronze Member]

Bazzaz Performance piggyback ECU.  Get a dyno remap for more power and buttery smooth throttle.  Slavens even uses it on his GOAT

Enduro Engineering Skidplate and Slave Guard (Same as Flatland Racing)

Kauba Link - Lower your KTM the easy way!

TurnTech Batteries - Save a few pounds and support an awesome retailer.

System Tech Racing - Another nice case guard.

Pro Moto Billet Spark Arrestor end cap - Use your stock exhaust in the USFS.

[mikes300 TT Platinum Member]

Kickstand
http://www.ktm-parts...MB-01-3006.html

shock tool
http://www.ktm-parts.com/22-311.html

another lowering link
http://www.ktm-parts...ECPRKT11-B.html

larger XC tank
http://www.ktm-parts...0701304499.html

[KTMsandwitch TT Bronze Member]

anyone know who makes flywheel weights for the 350's?

[mikes300 TT Platinum Member]

KTMsandwitch said:

anyone know who makes flywheel weights for the 350's?

it doesnt need one!! but no havent heard of one yet, but im sure its only a matter of time

[JoeT TT Bronze Member]

I thought the bike needed a little more flywheel for my riding.  After the Dyna ring I agree  with Mike, no need.

[KTMsandwitch TT Bronze Member]

what about mods to the cooling system? my 350 got quite hot on the tight trails (i know its not made for that kind of riding) and spat all the water out,

[kereams TT Bronze Member]

KTMsandwitch said:

what about mods to the cooling system? my 350 got quite hot on the tight trails (i know its not made for that kind of riding) and spat all the water out,

Here is what I would do, in order:

• Put in good coolant like the stuff from Maxima (or many other brands), or add some Water Wetter to whats in there.  MAKE SURE ITS BLED PROPERLY!
  
• Add a coolant recovery tank, homemade or one of the many kits.
  
• Add a radiator fan, plenty of information on that around here.
  
• Upgrade to the high flow metal KTM Hard Parts impeller.

[cd01 TT Bronze Member]

enduro engineering KTM bar riser kit 5mm, 10mm, 15mm

Im 5f 11" and tried the 10 mm riser with stock bars (672) and it is like riding a new bike !!
swept the bar back and its awesome !!

[kereams TT Bronze Member]

I purchased a skid plate for my 350 XC-F today.  I decided to go with the Ricochet over the Flatland as it has much better side protection for the waterpump.

http://utahsportcycl...e/sxf350pic.htm



Versus

[mikes300 TT Platinum Member]

Another FYI, anyone wanting longer throttle cables, heres the scoop the older longer cables will fit BUT they are not long enough,  the 350 stock cables are longer than previous cables, after some back and forth with Enduro engineering and motion pro, we came up with some cables that are long enough to run in front of the bars, not sure what they are off of, but the Motion pro part number is 10-0122, they are excellent quality black cables and a perfect fit complete with all the rubber and everything.

Mike

[markhillierrees TT Member]

To make my 350 run cooler I just used engine ice and fitted a fan to each rad. Got the fans of the internet (some refridgeration company) and stuck them on the rads wired them straight to the battery via a switch on the bars. Battery seemed to cope great had the on since july. Anyone know of a rekluse clutch or likewise part for the 350 yet?

Thanks Mark:thumbsup:

[cloverdale TT Bronze Member]

I was told the Core EXP would be available this week. They will not be offering the z-start pro for the 350SX. Sounds like the Core EXP has less "free wheeling"...

[markhillierrees TT Member]

I just had a email from rekluse today they told me 3rd week of feb release date