06' YZ450F Crank Play


3 replies to this topic
  • bhsballer76

Posted November 30, 2010 - 02:56 PM

#1

I was wondering how I would measure the side to side/ left to right play in the crank rod on my 2006 yz450f? I pulled the top end the other day and it had a little play at the very top of the rod..


Thanks

  • grayracer513

Posted November 30, 2010 - 03:46 PM

#2

Look at page 2-7 in the '06 manual and read this:

http://www.thumperta...d.php?p=9795655

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • bhsballer76

Posted November 30, 2010 - 08:16 PM

#3

Look at page 2-7 in the '06 manual and read this:

http://www.thumperta...d.php?p=9795655


do u have an 06 manual? my understanding is between .02-.04 inches? That would be measurement "F" correct?

  • grayracer513

Posted November 30, 2010 - 08:30 PM

#4

do u have an 06 manual?

Can you spell "you"? You could do that much if you want help from someone, eh?

"F" tells you the clearance at the rod bearing. This is to be measured by rocking the rod side to side WITHOUT letting it slide back and forth on the crank pin. And yes, that's .010 - .020". Letting it slide would include the side clearance ("A") and exaggerate the reading.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.