dog bone bearings

3 replies to this topic
  • Dustbuster

Posted October 14, 2010 - 09:23 PM


2006 yz 450. Can these bearings be pressed out, or do you use a blind bearing puller? Tried a vise and socket to press them out, but no good. Noticed a very small lip on the back side of the bearing as if there is a shoulder on the inside of the casting.

Edited by Dustbuster, October 14, 2010 - 09:24 PM.
missing info

  • YamaLink

Posted October 15, 2010 - 03:54 AM


If you mean the connecting rod arm, the bearings cannot be pressed straight through if I remember correctly.

I put an aluminum rectangular-ish spacer on the inside of the bearing that gets good contact in four spots, and press it out from the other side with a bolt/punch/whatever.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ForsheeMS

Posted October 15, 2010 - 05:32 AM


Nope, you'll have to have a blind bearing puller or rig something up to get them out. Can't press them straight through. All other bearings on that bike can be pressed out though.

  • Dustbuster

Posted October 15, 2010 - 06:08 AM


Thanks guys. That's what I thought.

Related Content


First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  35 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.