03' WR450 Starter Bushing needed!


2 replies to this topic
  • dudleyscrf

Posted October 13, 2010 - 12:05 PM

#1

Anyone have ever replaced the bushing and where did you get it from. Took the bike in trade knowing it has starter issue. Starter did bench test fine , just needs bushing , grinds and doesn't work right.I found out a Yamaha marine engine used the same starter and end cap.Thanks

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jayh300

Posted October 13, 2010 - 12:33 PM

#2

took mine off about a year ago and took it to an automotive starter shop.. they put a bushing in it, no problem..
but in reassembly, they tore the oring that seals the front housing and now it is a solid chunk of rust..... just bought a used one off ebay for 65.00, new they are 300.00
make sure if you take it apart, you mark the center part of the starter as to how it goes together... if you put the center part in backwards, the starter will spin backwards...

  • crooks420

Posted October 13, 2010 - 05:48 PM

#3

Check this link, lots of info.....

http://www.thumperta...starter bushing


Jesse




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.