WR400 Jetting question from a NEWBE

2 replies to this topic
  • wurty

Posted June 30, 2003 - 04:11 PM


I have a california edtion 1999 WR400 and it runs bad.
I am ready to jet it properly.
Please advise me as to what jets it needs and where the clip should be set. Is there some other info I need to make it run properly ?
I also have a stock pipe because I am too cheap to buy a real one.
Please give me the details.
Wurty in Tulare county

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Guest_Guest_*

Posted June 30, 2003 - 07:59 PM


Before you get flamed, read jetting Q's several times and search Larry co, taffy, and james dean. Look at everyones jetting in their sig's before you ask too many questions. And good luck and you will find what you need here...Domenic :)

  • wurty

Posted July 01, 2003 - 02:10 AM


thanks for the heads up.
I am just sure that question has been asked a million times.
Thanks again


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.