Bleeding rear brakes


2 replies to this topic
  • Wooten57

Posted September 21, 2010 - 05:39 PM

#1

Hello,
I had to rebuild my rear brake MC and now it's time to bleed the system. I am not having any luck at all - even attached a small hose to the bleeder on the caliper and sucked on it trying to draw fluid from the MC but am having no luck. Is there a proper procedure specific to this system to bleed it? The MC is rebuilt and I'm pretty sure it's back together correctly. It sucked a little from the reservoir but now it doesn't got down any. Thanks for any help on this.
-Dave
This is a 99 WR400F.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MaddogYZ

Posted September 21, 2010 - 06:22 PM

#2

Get a syringe from tractor supply and force fluid from the caliber bleeder, you should see it fill up the MC.

  • Lcpl0331

Posted September 21, 2010 - 06:30 PM

#3

Get a mityvac and you'll be done in 5 minutes.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.