Left hand case-Mainshaft bearing removal ?


2 replies to this topic
  • Mike Maner

Posted September 19, 2010 - 11:34 AM

#1

The victim is a 2001 WR426. I need to know if anyone has any tips or tricks for removing that bearing. It's the one that can't be driven out. Any help would be greatly appreciated.
Mike

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • William1

Posted September 19, 2010 - 12:50 PM

#2

Blind hole bearing puller.

Consists of a yoke, a center bolt and a mandrel. When the screw is inserted into the mandrel, it causes it to spread, grabbing onto the bearing. Installed in the yoke, rotating the screw pulls the bearing out.

  • Mike Maner

Posted September 19, 2010 - 01:40 PM

#3

William1,thank you for the information. I got it out a few minutes ago.
Mike




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.