WR400 plastic..??


7 replies to this topic
  • fooloop

Posted August 25, 2010 - 01:43 PM

#1

Does anyone know if wr 450, yzf450/250 plastic will fit on a wr400 2000 ??

  • fooloop

Posted August 25, 2010 - 01:51 PM

#2

Can someone tell me if any other plasti (wr 450 wr 250 yzf 450 yzf 250) will fit on a wr400 2000

  • Birdy426

Posted August 25, 2010 - 09:34 PM

#3

01, 02 YZ250/426 will all work on the 400...except the shrouds. The mount at the radiator is at a different angle on the 400s...

  • fooloop

Posted August 26, 2010 - 05:18 AM

#4

Thanks :foul: i only needed the front and rear plastic :bonk:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • YamaLink

Posted August 26, 2010 - 06:10 AM

#5

It will not. Here is a site to check the part numbers: http://www.yamaha-mo...parts/home.aspx

  • wroom

Posted August 26, 2010 - 07:06 PM

#6

Does anyone sell yellow plastics for the WR400F? I love mine in yellow, and dont want to go to the dark blue side.

  • Birdy426

Posted August 26, 2010 - 09:43 PM

#7

Does anyone sell yellow plastics for the WR400F? I love mine in yellow, and dont want to go to the dark blue side.


You won't find a WR rear fender with the light provisions. You can use a YZ400/426 rear fender (you have to trim a bit on the fwd right hand corner to clear the pipe) and an add on tail light. One Industries, Polysport, adn Acerbis all used to make yellow plastic for the YZ400/426...

  • wroom

Posted September 03, 2010 - 10:41 PM

#8

Thank you.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.