06yz450f motor

4 replies to this topic
  • bmwtech450

Posted August 10, 2010 - 10:22 AM


Hi i ride a 06 yz450f and the valve droped into the piston and it had a catistrophic failer,i want to buy a hole new motor,but i found 1 on ebay from moto-recycles that was 1800$ that is a 08 yz450f with 10-20 hrs on motor.So my question is will it bolt into my frame no problem and will my cdi connectors plug into it,and will it run good.with no ishues.my carb setings on the 06 motor was 48-170and 2.5terns out.

  • WB450

Posted August 10, 2010 - 12:30 PM


Gray or Ron will be able to help you out here.


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • William1

Posted August 10, 2010 - 01:49 PM


No, it will not bolt in. Also, that is way over priced for a used engine. It is worth at best, half that.

  • grayracer513

Posted August 10, 2010 - 03:57 PM


Why would it not bolt directly in? '06-'09 are 95% identical bikes. That engine is a bolt-in.

BTW, Please alert me if ever you should see an '07+WR450 engine at $900, too.

  • mike_dean

Posted August 10, 2010 - 05:14 PM


With 10-20 hrs, if legit, is a decent price, and it will bolt right in.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.