I agree... I dont think thread locker is necessary! Doesnt seem to be anything to pull or vibrate them loose.
2006-2008 Front Number Plate on 2000-2005 YZ250 How-to Post with Pics
Started by Tepco, Aug 09 2010 07:51 AM
33 replies to this topic
Posted 10 October 2011 - 08:45 PM
Just wanted to say thanks for this thread.
Got my 06 plate installed tonight on the 04 yz125. I went the zip tie route on bottom and it is absolutley secure. Zero movement. So I decided to leave it. The top I used a brass tube I bought at Ace Hardware for .50 cents, and 2 washers and it's perfect. It's about 17mm total I think.
Thanks again TT!!!
Got my 06 plate installed tonight on the 04 yz125. I went the zip tie route on bottom and it is absolutley secure. Zero movement. So I decided to leave it. The top I used a brass tube I bought at Ace Hardware for .50 cents, and 2 washers and it's perfect. It's about 17mm total I think.
Thanks again TT!!!
Posted 12 October 2011 - 03:05 PM
Mikebike125 said:
The tab is to keep your front brake line fron getting caught behind the front numberplate after you land off a jump..... If it gets caught behind there on the upper bolt mount the line will get pulled tight and might rupture...
The brake line getting caught behind the numberplate can also prevent your forks from returning to full travel and/or rip the numberplate off.
Posted 18 November 2011 - 10:43 AM
great mod cant belive i have only just noticed this sticky ha ha im going to do this along with the 450 fender thanks again
Posted 03 December 2011 - 10:44 AM
panicrev said:
Just wanted to say thanks for this thread.
Got my 06 plate installed tonight on the 04 yz125. I went the zip tie route on bottom and it is absolutley secure. Zero movement. So I decided to leave it. The top I used a brass tube I bought at Ace Hardware for .50 cents, and 2 washers and it's perfect. It's about 17mm total I think.
Thanks again TT!!!
Got my 06 plate installed tonight on the 04 yz125. I went the zip tie route on bottom and it is absolutley secure. Zero movement. So I decided to leave it. The top I used a brass tube I bought at Ace Hardware for .50 cents, and 2 washers and it's perfect. It's about 17mm total I think.
Thanks again TT!!!
Next "to do" job on my 06. It is so easy to put new fender on bike. I will just put 2010 fender, not 2010 plate, becouse old style 06-09 is much nicer
http://www.bikepics....p?i=2043141&s=0
Posted 05 December 2011 - 02:33 AM
Please help. I put the 2010 fender on 06 125.
but, anybody know that is the 08 YZ fork-guards just bolt on 05-07 YZ?
Or anybody put 2010 fork guards on YZ 2005-07?
but, anybody know that is the 08 YZ fork-guards just bolt on 05-07 YZ?
Or anybody put 2010 fork guards on YZ 2005-07?
Posted 14 December 2011 - 02:49 PM
UNICAM said:
...the 08 YZ fork-guards just bolt on 05-07 YZ?
Posted 27 December 2011 - 11:29 AM
did the side panels change in 06 too? because im getting new number backgrounds and i have a 06 front plate but i have 05 side panels.
Posted 27 December 2011 - 12:01 PM
iBRAAAP10 said:
did the side panels change in 06 too?
http://www.cyclepart...ect.asp?srt=mfg
...or aftermarket suppliers applications
http://shop.thumpert...t.asp?p=322&s=2
...will show...
...that the North American-market YZ125/250 side panels are the same from 2002 through 2010.
Posted 29 February 2012 - 04:41 PM
So to go along with a newer front number plate - will a newer year (2008) front fender fit a 2005 YZ 250?
