Gpr Stabilizer from 07 yz 250 to a wr 450


2 replies to this topic
  • garr87v

Posted August 07, 2010 - 10:25 AM

#1

I was wondering if anyone new if a gpr stabilizer from a 07 yz would fit a 07 wr 450. The guy has a new top clamp and the parts to fir a yz 450. Thanks for the help.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted August 08, 2010 - 10:29 AM

#2

If I'm not mistaken, the top clamp for the '07 YZ250 or 450 (and any others using the late, twin chamber YZ fork) is 2mm wider than the WR or earlier YZ models. Without knowing how the damper anchors to the frame, I'd say that would be a snag right there.

  • kawi380

Posted August 10, 2010 - 04:53 AM

#3

The GPR mounts to the top bar clamp not the triple clamp. Having said that I don't know if the top bar clamps are the same for the WR and YZ but I would think that the guys at GPR would know best. The mount also fits around the steering head on the frame and anchors with a few set screws. This is most likely the same also...but again call GPR and ask them.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.