what is this l shaped part?


2 replies to this topic
  • Snapper

Posted July 25, 2010 - 12:48 AM

#1

ok *** is the L shaped bit i found under my bash plate?

i decdided to clean my bike a little bit (no it's true)

behind one of the bash plates i found this bit.

when the bike blew it's head gasket i actually stopped riding it because it started making a hollow noise as if the header pipe had fallen off -

appears that it was this which is just above the header pipe and appears to be in a hole which is straight thru to the exhaust port.

I can only guess that the block got hot (due to blown head gasket) and it then fell out?

hopefully it will just push back in to place?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Snapper

Posted July 25, 2010 - 01:01 AM

#2

I think it is the bung from the decomp hole?

why did it fall out?


Posted Image

Posted Image

Edited by Snapper, July 25, 2010 - 02:18 AM.


  • Snapper

Posted July 25, 2010 - 03:48 AM

#3

it's in the manwell afterall - not under the cylinder head section or the exhaust section but tucked in with the carby - it is where the "Air Induction System" would go - obviously something not on the ADR delivered models.

now how to make sure it doesn't fall out again? (loctite and snot)




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.