08 yz450f water pump


1 reply to this topic
  • jasangshaf

Posted July 24, 2010 - 07:03 AM

#1

How do you remove the impeller and shaft assembly? I have removed the cover to and I turned the impeller a few times but it did not loosen up.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted July 24, 2010 - 07:48 AM

#2

Remove the right side crankcase cover (drain the oil first). You'll find a pair of flats ground on the inboard end of the impeller shaft that will let you use a 13mm wrench to hold the shaft while you unscrew the impeller.

Trying to do this by unscrewing the impeller from the outside runs the risk of breaking the drive tab off of the shaft, and will prevent you from inspecting the shaft for a groove worn by the seal.





Related Content

Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.