93 replies to this topic

[Eddie Sisneros]

SisnerosSpeedWorks.com for quick and easy purchasing of Sisneros Speed Works products and fuel injection tuning services.

Sisneros Speed Works Super Start kit

Sisneros Speed Works  "Free Power Mod" harness

Sisneros Speed Works high clearance choke assembly for the fcr-mx

Sisneros Speed Works pricing for RHC cams/valves,SSW springs

Sisneros Speed Works cap on coil conversion

Sisneros Speed Works single pull quick turn throttle

Sisneros Speed Works Manual Fan Override Switch

Sisneros Speed Works Crankshaft Inspection Plug

Sisneros Speed Works 50hp package

Sisneros Speed Works Cam Chain Service Kit

Sisneros Speed Works Oil Change kit

Sisneros Speed Works Engine Install / Top end Service Kit

[Sal Sisneros TT Bronze Member]

i was wondering when u were going to put all ur products in one thread

[smrookie troller]

Bitchen' !!

The list is growing slowly, but surely.

[Eddie Sisneros]

there are more to come!

[ptgarcia Get Help Now]

Sounds like its about time to build a web page.

And where's the link to some t-shirts?

[Eddie Sisneros]

all coming,dont worry. everyone will pleasantly suprised when the plan comes togeher.

[Sundog Get Help Now]

Eddie Sisneros said:

there are more to come!

:cry:
//DOH...gotta burn the checkbook...

[bumtarder TT Addict]

hey eddie,any plans on offering your turkey baster coolant recovery tank mod as a kit?

[Eddie Sisneros]

interesting thought.

if there is demand i will produce it.

[Sal Sisneros TT Bronze Member]

i demand u produce it

[Eddie Sisneros]

i appreciate all the orders!

ive got throttle kits,start kits,cap/coil kits and chokes in stock and ready to ship!

[ROMAD TT Silver Member]

+1 on the Turkey baster kit.

A couple other ideas for those of us that hate chasing parts all over town or dealing with minimum order prices from Sudco:

- CE removal kit: a couple vaccuum caps and the proper PAJ or adj screw and maybe a pic or two.

- OEM jet/3x3 kit: Most everybody comes to you for jetting anyways, why not offer the OEM jets and needle/clip as a kit. I know it took me a couple trips to local places to find OEM jets and even then I was sold the wrong jets and had to go back to get the right style jets. Lost a whole Saturday running around chasing the right $5 jet. Throw in a 3" putty knife and a pic or two just to make it complete. Maybe even offer (as an option) a 'high altitude' jet with the parts if the buyer had freqent trips to a significant elevation.

- AP mod kit: For the dremel challenged or those that just dont want to grind on their own parts. Throw in some safety wire and a pic or two. I know the diaphram isnt cheap but maybe a core fee and swap out could work? Would be really cool if there was some sort of bushing that could be fitted to the plastic arm so help repair it or keep it from getting so egged out.

- TPS block off plate: I hate having that pig tail sitting there unplugged knowning it isnt doing anything. Maybe a milled out cover piece that would allow the TPS to be removed, the hole filled and the throttle shaft properly captured If it wasnt stupid expensive I'd like one just to clean up the carb area. I think Dr.Honda made one for a personal project once, looked cool.

I am sure there is some more cool stuff lurking in the SSW research lab that would sell if it saw the light of day. Sorry if this isnt the proper place for the ideas, just want to see SSW thrive!

Edited by ROMAD, 02 August 2010 - 03:08 PM.

[Eddie Sisneros]

all good ideas.

[bumtarder TT Addict]

eddie,didn't see it on the product list but i assume that the "free power" mod harness is still available thru you apart from the super start batt kit.if so,i'll need one for my E model.is it still $10 shamolians?

[Eddie Sisneros]

yes,i still offer the harness.

$10 shipped.

[Eddie Sisneros]

"free power mod" harness added to the list. not new but now has its own listing.

[KLRBach TT Bronze Member]

Hi Eddie

My (your) 440 BB motor in my '00 plated E ran great at the Adv WMRS run last weekend.


So now the next step is address the suspension and the ergonomics.

Are you doing any suspension work/products?
I have to pull the front and rear suspension apart and put all new bushings,bearings,chains,sprockets etc in to replace my  broken/worn out parts.

For ergonomics, I have to do something to get the bars up since I'm 6'7" and 280lbs. I recently added the offset DR Rizers and that helps alot but I need to do something about taller bars. Can you recommend a taller bar? Will your throttle kit work with rizers and a taller bar?

So my wishlist for parts from Eddie.

Cap Coil
New throttle/cable that will work with taller bars/risers
Turkey baster coolent recovery system.

plus...

a fastener replacement kit...  for all the common sizes of fasteners
bearing replacement kits
chains sprockets
oil/air filters... and associated crush washers

and a list of services you offer...  such as engine rebuilding
suspension services if any etc.   now that you are in your new location.

HTH

Randy from Burbank

[Eddie Sisneros]

im still doing and offering all the same services.

suspension,motors,complete bike builds,repair,etc etc.

my throttle will work with taller bars.

im not sure which is most popular bar bend currently.

i prefer the cr hi.

i will make another pinned thread with common services prices.

[Goebz TT Addict]

How about a fully mode, jetted FCR with everything needed?

This is going on my Christmas list.

(I Am at 1200 ft)


PM me if you need to.

[Eddie Sisneros]

no problem.

just let me know when you are ready.