yz426 / yz400 clutch hub the same?

1 reply to this topic
  • bink98xcab

Posted July 07, 2010 - 09:24 AM


my bro has a yz426 (01) and the clutch is very grabby as in you cannot adjust it at all. i took it apart and the hub has a lota of play like the nut isnt on tight when in fact it is on very tight w/ an impact. so i was wondering if a yz400 hub was the same, since i can get one of those dirt cheap. any other help on the problem would be greatly appreciated

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Birdy426

Posted July 07, 2010 - 10:40 AM


Nope, they are not the same. Hub shouldn't be loose, tho, as it's on a splined shaft. Pull it apart and make sure that the thrust washer is there between the basket and hub, and that it's not hung up on a burr on the splines...

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.