Hi Velocity Porting--PowerNowing your Cylinder Head

No replies to this topic
  • gottaroost

Posted June 11, 2003 - 03:30 AM


I was scrolling through this link...


The author has an interesting take on porting...it seems to follow the Power/James/AvNow concept where less is more with regard to flow. He is essentially narrowing the flow passages rather than the conventional enlarging/polishing that is commonly performed. He makes quite a case for it.

If you look to the bottom of this link, it is articles 16 and 17. 16 explains the theory and 17 shows you how to begin. I have not tried this at home, but thought it might make for interesting experimentation.

He did not perform this on a dirt bike, but it looks like the theory could crossover.

If you cannot get in, then try going to mototuneusa.com and register to receive the newsletter.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.