Grayracer follow up


1 reply to this topic
  • blakers213

Posted June 28, 2010 - 04:28 PM

#1

I sure you don't remember but I have a new 2009 yz450f completely stock and it runs rough at a steady 1/4 throttle. You recommended unplugging the TPS and it worked. Then you suggested a richer needle a NLFP I think it was , anyhow it is coming in Wednesday, I work until Friday and I am racing Friday evening so I don't have a lot of time to play with it so what clip do you suggest to start at? I thing the stock needle is in the 3rd clip so should I try the richer needle in the 3rd slip also?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted June 28, 2010 - 06:10 PM

#2

NFLP. The needle is richer from 1/8 to 1/4 throttle only. Past that, it's the same as your original. Start with the clip in three.





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.