Swingarm thickness under chain slider


No replies to this topic
  • thurgood

Posted June 22, 2010 - 07:06 PM

#1

Does anybody know what the thickness of the swingarm is directly beneath the chain slider? This is on a 2001 426F. I've got what I would call normal wear and will be attaching some stainless shim stock with silicone shortly to stop any further damage, but was concerned about how much wall thickness I've worn through already.

Has anybody done a weld overlay on this area of the swingarm? If mine is worn down enough to warrant welding, I don't want to put any silicone on the area so I won't have to fool with cleaning it off before welding. I'd be better off to pull the swingarm and weld it now, then do the grayracer slider mod.





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.