2010 Rekluse question


7 replies to this topic
  • almostinvincible119

Posted June 16, 2010 - 11:19 AM

#1

Will the Rekluse Z-Start Pro for an 09 model fit the 2010 model? I really dont want to pay the extra 300 bucks for the EXP when it really is ALMOST the same as the pro. And it looks like with the EXP that the 09 part number is identical to the 2010 part number on the rekluse site.

09 Rekluse EXP (look at part #)

http://rekluse.mybig...EXP-Clutch.html

2010 Rekluse EXP (look at part #)

http://rekluse.mybig...EXP-Clutch.html

09 Z-Start Pro
http://rekluse.mybig...Pro-Clutch.html

  • racerxx276

Posted June 16, 2010 - 05:30 PM

#2

I took my pro out of my 08 and it fit fine on my 10. I also spoke to rekluse and they said it was ok also. You will need to get a thicker gasket for the stock 10 clutch cover...

  • GreenHornet450

Posted June 16, 2010 - 05:35 PM

#3

Check REVLOC out

http://www.revloc.co...id/10/DynaRing/

  • kvillektm

Posted June 16, 2010 - 05:42 PM

#4

rev what? I put a z start pro from my bro's 07 wr right into my 2010 yz450, works great. :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • GreenHornet450

Posted June 16, 2010 - 05:49 PM

#5

rev what? I put a z start pro from my bro's 07 wr right into my 2010 yz450, works great. :thumbsup:


Revloc Dyna Ring.

  • moto278

Posted June 16, 2010 - 06:42 PM

#6

just checked out the revloc dyna ring website. anybody use it or try it? hows it hold up?

  • almostinvincible119

Posted June 16, 2010 - 07:54 PM

#7

Thanks RacerXX....where would I come across this thicker gasket?

and as far as the revloc goes....I think I'm going to go with something proven

  • racerxx276

Posted June 17, 2010 - 01:48 PM

#8

give rekluse a call, they will send you one...





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.