Sudco Adjustable PAJ ?
Posted June 04, 2003 - 02:05 PM
What increment does 1/4 turn do? Thanks.
Posted June 04, 2003 - 02:09 PM
Posted June 04, 2003 - 02:13 PM
3/8 = 55PAJ
1/2 = 65PAJ
5/8 = 75PAJ
3/4 = 85PAJ
7/8 = 95PAJ
1 = 100PAJ
1 1/8 = 110PAJ
1 1/4 = 120PAJ
1 1/2 = 125PAJ
I removed the note larry line!
Posted June 04, 2003 - 02:22 PM
That's what I'm currently running with my 38PJ and EKN at 800 ft. altitude...and what I ran in CO with a 38PJ/EKP...if that's what you mean.
Posted June 04, 2003 - 02:35 PM
that was "taken" from a post originally made by taffy. I just cut and pasted it!
Posted June 04, 2003 - 03:07 PM
Thanks for the chart and quick response. And to LarryCO your jetting is my starting point. Now that you have come down to thicker air our jetting issues will be closer. Thanks for the starting point.
Posted June 05, 2003 - 04:47 PM
click on Carberator Diagrams,
click on FCR Sidedraft,
click on FCR parts page (bottom)
then look at #30.
Slow Air Screw and Spring
(replaces Slow Air Jet)
021-230 1014-817-2000 screw
021-235 16052-KM4-0040 spring
this is what your looking for.
and heres the Chart to adjust the screw and the adjustable air jet part number is also listed at the bottom of the chart.