Need some help with a Scotts stabilizer


4 replies to this topic
  • Polar_Bus

Posted April 10, 2010 - 10:35 AM

#1

Hi guys, I could use a big favor. I have a 2001 KX500 with a Scotts/Ohlins steering stabilizer (friggin' LOVE it). After my maiden trip out to my MX practice track on my YZ450F I realized I am an old hag rider, and I just don't have the stamina I had years ago and arm pump gets worse every year for me.. I want to fit a Scotts to my YZF, but would like to save an additional $300 and possibly just buy a YZF sub mount bracket kit and use my KX500's damper unit if possible. Attatched is some pics of my KX500 unit. The p/n on the back reads: SD-4260 119016 004

The mount holes are spaced 2.125" apart, and the unit physically fits in between my YZF's bar mounts nicely. If one of you could closely look at your '06+ YZ450's and tell me if I can use this unit will work with the YZF kit I would greatly appreciate it. I emailed Scotts a week ago and not got an answer. Thanks !

Rich

Posted Image

Posted Image

Edited by Polar_Bus, April 10, 2010 - 11:54 AM.


  • Chas_M

Posted April 10, 2010 - 04:22 PM

#2

All Scotts dampers are universal and interchangeable between bikes as long as it fits the mounting system.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Polar_Bus

Posted April 11, 2010 - 05:02 AM

#3

I had heard that Scott's only had one damper unit but I wasn't sure. Thanks for the info !

  • BaileyAZ

Posted April 11, 2010 - 09:30 AM

#4

You will have to spin the bar 180 degrees if you are going to use a bar style mount. Besides that, you should be good to go.

  • Polar_Bus

Posted April 11, 2010 - 02:05 PM

#5

You will have to spin the bar 180 degrees if you are going to use a bar style mount. Besides that, you should be good to go.


Yea, after observing thew install pics on the Scott's site, I realized this detail. No biggie. I went ahead and ordered the sub mount bracket kit, and made a special puller to pull the arm and flip it around.





Related Content

Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.