YZ400F hotstart to bars

No replies to this topic
  • Shawn

Posted January 10, 2001 - 04:47 PM


I moved the hotstart button up to the handlebars for around $7. It was pretty easy just safety wired it to the bars, handgaurd and brake master cylinder. Then ran some (fuel) line up along the throttle cables and switched it over to clear line behind the numberplate. Then ran the intake line behind the numberplate and put a small fuel filter on the end. Plug the airbox hole! Now I have a hotstart button right by the throttle (something to help keep from twisting the gas during restarts). What do ya’ll think? I have pics if anyone would like to see them, not sure how to post them.

Related Content


Is the 2016 GYTR Yamaha YZ450F too fast? by Fryboy

Dirt Bike   Special Interest Forums   Pro Racing
  • * - - - -
  • Hot  241 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Help with 2000 yz426 by weekend woods racer

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.