Print Your Own Parts Book (YZFM 426)



17 replies to this topic
  • Hick

Posted January 10, 2001 - 08:38 AM

#1

Print Your Own Parts Book (YZFM 426)

One of the first things I did when I discovered the HLSM Yamaha on-line parts fiche (and mail order store) that someone posted here was print out each fiche and parts list and put the pages in a binder. This is a great tool to have in your shop to help you work on your bike and to make sure you get the correct part for your scoot. I refer to mine so often I had to reprint it because the first one I did is oil-stained on every page (unfortunately for me I’ve ordered parts from almost every fiche).

At any rate it occurred to me that, due to the embedded frames nature of the HLSM site, not everybody had the patience to figure out how to print each “frame” separately. So, being the helpful sort (or trying to), I decided to post a link to each exploded view (GIF) and each corresponding parts list (HTML) so whoever wants to can just click and print, click and print their way to a complete parts manual.

If this ain’t helpful to anybody then apologies to Bryan for wasting Thumpertalk server space :)

The below is links for all the fiche for the ’00 YZFM 426. To successfully print the entire parts LIST page you will probably have to go to the “File” menu and click “Page Setup” then select “Landscape” but I think all the “Exploded View” shots (GIFs) will fit on a page normally.

<UL TYPE=SQUARE>
<LI>Alternate-Chassis Exploded View LIST
<LI>Fender Exploded View LIST
<LI>Frame Exploded View LIST
<LI>Front Brake Caliper Exploded View LIST
<LI>Front Wheel Exploded View LIST
<LI>Rear Arm Exploded View LIST
<LI>Rear Brake Caliper Exploded View LIST
<LI>Rear Master Cylinder Exploded View LIST
<LI>Rear Suspension Exploded View LIST
<LI>Rear Wheel Exploded View LIST
<LI>Seat Exploded View LIST
<LI>Side Cover Exploded View LIST
<LI>Stand – Footrest Exploded View LIST
<LI>Radiator – Hose Exploded View LIST
<LI>Water Pump Exploded View LIST
<LI>Clutch Exploded View LIST
<LI>Shift Cam – Fork Exploded View LIST
<LI>Shift Shaft Exploded View LIST
<LI>Transmission Exploded View LIST
<LI>Electrical 1 Exploded View LIST
<LI>Generator Exploded View LIST
<LI>Handle Switch – Lever Exploded View LIST
<LI>Starter Exploded View LIST
<LI>Camshaft – Chain Exploded View LIST
<LI>Crankcase Exploded View LIST
<LI>Crankcase Cover1 Exploded View LIST
<LI>Crankshaft – Piston Exploded View LIST
<LI>Cylinder Exploded View LIST
<LI>Oil Cleaner Exploded View LIST
<LI>Oil Pump Exploded View LIST
<LI>Valve Exploded View LIST
<LI>Carburetor Exploded View LIST
<LI>Exhaust Exploded View LIST
<LI>Fuel Tank Exploded View LIST
<LI>Intake Exploded View LIST
<LI>Front Fork Exploded View LIST
<LI>Front Master Cylinder Exploded View LIST
<LI>Steering Exploded View LIST
<LI>Steering Handle – Cable Exploded View LIST
[/list]
I hope someone finds this useful because that was a pain in the rear (geez, I hope it works). Maybe I am underestimating the Web Prowess of the avg. Thumpertalk denizen? Can everybody figure out how to print it without my help? Or are Boit and I the only ones who think a parts book is a necessity? Comments?


[This message has been edited by Hick (edited 01-10-2001).]

  • dirtdad

Posted January 10, 2001 - 08:57 AM

#2

Hick, As usual you've supplied some useful info here. I do all my own wrenching on EVERYTHING I own and this will come in very handy since I live about an hour and a half from the nearest dealer and I certainly don't like paying their prices on anything! I've printed out only the first section so far but for all interested out there, my kids can do more on the computer than me and I found it very easy to do. Just wanted to give you a response before I settle in to print it all. Thanks again!

Urb
00 YZ426
S.E. Pa.

------------------
like a kid again, 00426

  • AngryCandy

Posted January 10, 2001 - 09:10 AM

#3

Has anyone put all the gifs & PN lists into one file in Word? If not, I guess since it's my idea, I got the job. I'm working from home today, and my connection is really slow, but if I have time, I'll pull everything down tomorrow & create the .doc. I'll let you know when it's done and can email it to anyone who needs it.

  • Hick

Posted January 10, 2001 - 09:43 AM

#4

Originally posted by AngryCandy:
Has anyone put all the gifs & PN lists into one file in Word?


I think your idea trumps mine…

  • scottzx7rr

Posted January 10, 2001 - 10:31 PM

#5

If anybody want the 99 I have already done a Word/Excel Matrix for it. I combined the pics and the parts list into a single document. I can send it to anyone that wants it.



------------------
Scott #431
Some Fear Racing "Cause if you don't have any you ain't going fast enough"
'99 YZ400F(Coming to a Theater near you soon)
'92 ZX-7R and '97 ZX-7RR
"Doesn't hurt till the bone is exposed"
"When cut do you bleed green? I do!"
Pics

  • dirtdad

Posted January 10, 2001 - 10:50 PM

#6

Hick, Just completed printing. Only took about an hour or so. Of course, I guess that depends on your printer, etc... I don't know that having it in a word doc would make it much quicker. I guess it would be easier for the end user to download and print. Fewer clicks of the mouse and all. Still, was not that bad. Thanks again.
I'll use it! Just my two scents.

Urb

  • Tom_N

Posted January 10, 2001 - 01:33 PM

#7

That resource looks awesome Hick, is there any info on the 98 400F ? If so where should I go, I am ready to fire up the printer and go through some trees... :)

  • Hick

Posted January 10, 2001 - 02:46 PM

#8

Tom,

98 YZFK 400 is below, I hope. Here is a link to the page with all of the models listed HLSM Yamaha Dirt Bikes

Plus, I missed a section on the above ’00 426 post, the “Valve” page. I will correct and include this part in bold type (just before carburetor and after oil pump).

I just did a “replace with” and subbed “98YZ400FK” for “2000YZ426FM” and reposted below, cross your fingers…


<UL TYPE=SQUARE>
<LI>Alternate-Chassis Exploded View LIST
<LI>Fender Exploded View LIST
<LI>Frame Exploded View LIST
<LI>Front Brake Caliper Exploded View LIST
<LI>Front Wheel Exploded View LIST
<LI>Rear Arm Exploded View LIST
<LI>Rear Brake Caliper Exploded View LIST
<LI>Rear Master Cylinder Exploded View LIST
<LI>Rear Suspension Exploded View LIST
<LI>Rear Wheel Exploded View LIST
<LI>Seat Exploded View LIST
<LI>Side Cover Exploded View LIST
<LI>Stand – Footrest Exploded View LIST
<LI>Radiator – Hose Exploded View LIST
<LI>Water Pump Exploded View LIST
<LI>Clutch Exploded View LIST
<LI>Shift Cam – Fork Exploded View LIST
<LI>Shift Shaft Exploded View LIST
<LI>Transmission Exploded View LIST
<LI>Electrical 1 Exploded View LIST
<LI>Generator Exploded View LIST
<LI>Handle Switch – Lever Exploded View LIST
<LI>Starter Exploded View LIST
<LI>Camshaft – Chain Exploded View LIST
<LI>Crankcase Exploded View LIST
<LI>Crankcase Cover1 Exploded View LIST
<LI>Crankshaft – Piston Exploded View LIST
<LI>Cylinder Exploded View LIST
<LI>Oil Cleaner Exploded View LIST
<LI>Oil Pump Exploded View LIST
<LI>Valve Exploded View LIST
<LI>Carburetor Exploded View LIST
<LI>Exhaust Exploded View LIST
<LI>Fuel Tank Exploded View LIST
<LI>Intake Exploded View LIST
<LI>Front Fork Exploded View LIST
<LI>Front Master Cylinder Exploded View LIST
<LI>Steering Exploded View LIST
<LI>Steering Handle – Cable Exploded View LIST
[/list]

It looks like it is working...

[This message has been edited by Hick (edited 01-10-2001).]

  • Boit

Posted January 10, 2001 - 06:13 PM

#9

Geez Hick, this was very generous of you to go through all the trouble. Being the goofy geezer that I am, I always just ran from the garage to fire up my PC, go to the bookmarked microfiche site to find what I wanted. This will save me so much time. You're OK...want my car? It's an '87 Civic... :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • motoman393

Posted January 10, 2001 - 06:36 PM

#10

Thanks a bunch Hick,

I was going to print out the parts when i first got my 426 but I decided to wait til i had more time...well now you already did it for us! All i have to do is wait til tommorrow until i can get ALOT of paper :) Thanks a Bunch!

Garrett

------------------
I get my kicks on a 2001' YZ426!
Friendswood, TX

  • Tom_N

Posted January 11, 2001 - 05:35 AM

#11

Hick -Thanks for all the info and the trouble it must have been. This will be aweseome... I will print it today and can not wait to go through it.

Hey everyone, not sure where you all are at but there is talk of a colorado thumper trip this spring/early summer. We want to get a bunch of thumpertalk.com members together and ride.. If interested check out the topic of Colorado Thumper Trip for more info!

Could be a great time!

  • Tom_N

Posted January 11, 2001 - 06:50 PM

#12

WOW this manual will be awesome, I have 1/2 of it printed so far and its very cool.

Thanks again to Hick for all the work it must have been to post this info. I am ready for a binder, tabs and sheet protectors (to protect from the grease). Its a good thing I am a manager at an office supply company as it is a tree killer for sure. Have plenty of paper handy but its worth it! Thanks again Hick!

  • techman

Posted January 12, 2001 - 05:01 PM

#13

If anybody makes a single document out of it, how about firing it through Acrobat and making a PDF file? Everyone can read PDF in their browser, and zoom into the pictures as desired as well - a benefit over a word processor file.

  • mike_dean

Posted January 14, 2001 - 03:14 AM

#14

Thanks Hick, I just finished printing the manual, I am very slow with a computer but your instructions worked fine. I will use this more than any other manual.

  • MikeOK

Posted January 14, 2001 - 06:42 AM

#15

I did a little project like this a few months back, if any of you want them all in a .zip file you can get them here:
http://www.geocities...sr/426fiche.zip

  • MikeOK

Posted January 14, 2001 - 06:49 AM

#16

hmmm it isnt working so if anybody wants it you will have to email me and I'll send it to you...

Mike

  • Tony_Williams

Posted January 23, 2001 - 07:14 PM

#17

You boys have done God's work here !!!

I'm at work now, where I would go to jail if I printed this stuff, so I'll be a busy beaver tonight.

My brother and I both have '98 YZF's, and he keeps his in my garage (thinking I'll do all the maintenance!)

Tony

  • scottzx7rr

Posted January 26, 2001 - 10:57 PM

#18

There is a Paul that just sent me a email asking for the file but when I tried to send it to your Rocketmail and Juno accounts it told me you don't have accounts. If you have another email address let me know and I will send it to that one.

------------------
Scott #431
Some Fear Racing "Cause if you don't have any you ain't going fast enough"
'99 YZ400F(Coming to a Theater near you soon)
'92 ZX-7R and '97 ZX-7RR
"Doesn't hurt till the bone is exposed"
"When cut do you bleed green? I do!"
Pics





Related Content

Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.