Sea Level Jetting



3 replies to this topic
  • Thumper448

Posted January 04, 2001 - 07:57 AM

#1

Where have you sea level guys been ending up on jetting on the '01 426? I've had mine for a week but there's way too much snow(over 2' in my back yard) to ride here in Indiana.

Any input would be appreciated for a good starting point.

Thanks,

Stace

------------------
Pretty fly for a fat guy!

  • ICEMAN

Posted January 04, 2001 - 08:26 AM

#2

48 pilot, stock main, fuel screw at 1-1/4, needle 1 pos richer on the clip sea level in ct now. runs great!!!!


TMX AND MY DOGS BITE!!!!!!!!!!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jaybird67k

Posted January 04, 2001 - 08:45 AM

#3

All stock here, runs great.


Jason

  • motoman393

Posted January 04, 2001 - 01:25 PM

#4

I had trouble getting the bike to start w/stock jetting and when it did start it was hard to keep running for the initial warm up period! So I put a 168 main 48 pilot and 1 1/2 turns on fuel screw! Runs great and idles when I start it up (like it should) and rips all the way through the powerband til i hit the rev limiter(which i do alot)! Hope this helps! Jetting is bike/rider specific just experiment w/ it jets are cheap for a reason!

Garrett

------------------
I get my kicks on a 2001' YZ426!
Friendswood, TX





Related Content

Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.