clutch arm spring? HELP!!!!!!!!!!!!!!!!


6 replies to this topic
  • baskie2000

Posted March 30, 2010 - 01:32 PM

#1

does anyone know how to remove the clutch cable push rod arm thingy? located above the front sprocket, as i need to replace the spring that sits on the arm.

Posted Image

  • grayracer513

Posted March 30, 2010 - 02:16 PM

#2

To bad about that sticking key on your computer.

What year/model bike?

  • JandJ07

Posted March 30, 2010 - 05:21 PM

#3

To bad about that sticking key on your computer.


:lol::applause::thumbsup::)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • baskie2000

Posted April 01, 2010 - 03:33 PM

#4

To bad about that sticking key on your computer.

What year/model bike?



its a 2005 wr 450 F (uk model)

any help or adive would be super.

many thanks
bask

  • sacfelix

Posted April 01, 2010 - 05:44 PM

#5

does anyone know how to remove the clutch cable push rod arm thingy? located above the front sprocket, as i need to replace the spring that sits on the arm.

Posted Image



To remove the clutch cable push rod arm thingy I would adjust the clutch cable all the way in on the lever and then remove the nut at the base of the head that holds the clutch cable. Once the nut is removed pull the cable out of the holder and disconnect it from the arm. You could then lay the bike over and remove the clutch cover or drain your oil first and then remove the clutch cover.
Posted Image

Remove the pressure plate, thrust washer and dont lose the little steel ball
Posted Image

And slide the rod out a little to allow the clutch arm to release(I have the whole clutch basket out already in the photo but you dont have to)
Posted Image

You can then remove the bolt and pull the arm straight up.

Here's the schematic for you.
http://www.bikebandi...m10301sch522502

  • grayracer513

Posted April 01, 2010 - 08:10 PM

#6

Yup, you need to open up the clutch and pull the inner push rod. It fits into a notch in the bottom of the release arm, so with the rod in place, the arm can't be lifted out.

  • baskie2000

Posted April 03, 2010 - 08:27 AM

#7

omg, what a lot of bother just to replace a little spring!! on dt's and tzr and other smaller singles the arm just lifts right out. weird. oh well thanks guys for the input. many thanks.





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.