Question about my WR450.


3 replies to this topic
  • kixx

Posted March 27, 2010 - 01:06 PM

#1

I recently bought a 2009 wr 450 f , the bike came pretty lean from the factory , i had the carb richened up and it seemed to run alot better ,Fired the bike up last night let it warm and i noticed at low throttle it was surging and popping and when i shut it down it made a pop out of the exhaust ,Has any one had similar problems or any ideas ,should i change the factory jets

Thanks

  • ArcticWR400

Posted March 27, 2010 - 01:52 PM

#2

I found this in the stickies...
http://www.thumperta...ad.php?t=576586

Might help out... also, if you read here it may help also:
http://www.thumperta...ad.php?t=440372

I am by no means an experienced rider / maintainer... but have read up a lot on my bike ('99 WR400) and been thru most of the info I could find on this site.

Hope this helps! Enjoy the new set of wheels, I wish I could affort a shiny new one :lol: but I still love the old dirty beast I got... a new one would be more machine than I could likely handle anyhow! :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • PBDBLUE

Posted March 27, 2010 - 02:48 PM

#3

The bike comes very lean from the factory to meet emissions. Not sure what was done on yours to richen it up but it sounds as though the jetting is off. You can play with YZ needles and pilot jets or if you prefer the quick and easy solution go with a JD kit.

http://www.jdjetting...4&cat=12&page=1

  • kixx

Posted March 28, 2010 - 08:28 AM

#4

Thanks




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.