yz 03 vapour power connection


No replies to this topic
  • jacobk1

Posted March 20, 2010 - 09:00 PM

#1

wonder if any one can help?
Ive just purchaced and installed a vapour compter from trailtech,im having trouble connecting the power to the device. in the instructions it says to connect the power leads from the device to the ignition power leads from the stator. i dont know what colour leads these are! so i first gave it a go on the pink lead from the stator and the bike would idle but wouldnt rev. then i gave the black lead a go and every thing was fine the bike idled and reved well, so i completed the installation and tidy up all wiring and put the bike back together. then decided to take it for a test ride and once i put it into gear it would idle or rev. can any one please help as ive had no responce from trailtech





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.