2010 450 parts


9 replies to this topic
  • eazrider

Posted January 29, 2010 - 07:03 AM

#1

Does anyone know if there is a parts listing available yet for the 2010 YZ 450? It is still not available on the Yamaha website....I pulled the hardware on my '10 and loctited components down, but like a knucklehead, did not snug one of the shroud bolts and it fell out...I can substitute another generic bolt, but want to replace the flanged 6mm bolt with the right part.

  • grayracer513

Posted January 29, 2010 - 10:58 AM

#2

Shouldn't be too different from what's used on an '06-'09.

  • Beanb1

Posted January 29, 2010 - 08:24 PM

#3

Your Yamaha dealer can get the part # off the yamaha dealer site. I have had to find part numbers for new fenders and some other parts from the site already. Your dealer should check availablity for the specific part you need before ordering, as well.

  • CaptainKnobby

Posted January 31, 2010 - 01:53 AM

#4

Anyone know the size of the front and rear rims for the 2010 450f

  • sherco67

Posted January 31, 2010 - 04:43 AM

#5

unchanged from 06-09, maybe even earlier models
front is: 21x1.60 and tie size is 80/100-21
rear is: 19x2.15 and tire size is 120/80x19

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • CaptainKnobby

Posted January 31, 2010 - 06:49 AM

#6

unchanged from 06-09, maybe even earlier models
front is: 21x1.60 and tie size is 80/100-21
rear is: 19x2.15 and tire size is 120/80x19


Thanks! I'm going to order a set of these

http://www.rockymoun...2#vehicleSelect

  • Frank_z28

Posted January 31, 2010 - 07:12 AM

#7

So i guess SM wheel from a 08 will fit?

  • moto278

Posted January 31, 2010 - 08:56 AM

#8

Thanks! I'm going to order a set of these

http://www.rockymoun...2#vehicleSelect


get back to us how the wheels work for ya. ppl i talk to around here when it comes to aftermarket dont waste money on anything buy excel rims. but for 500 for a set, if the work id be just fine with them for back up!

  • Mike546

Posted January 31, 2010 - 03:51 PM

#9

So i guess SM wheel from a 08 will fit?


If you look on the RockyMountain site the 2010 wheel set has a different part number than the earlier models.

  • neal99

Posted January 31, 2010 - 04:50 PM

#10

Thanks! I'm going to order a set of these

http://www.rockymoun...2#vehicleSelect


you get what ya pay for! check on the weight too.. most aftermarket wheels are considerably heavier than stock..just somethin to think about..





Related Content

Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.