BK mod and jetting

1 reply to this topic
  • crushedreams

Posted May 09, 2003 - 07:16 PM


I have a wr450 that is uncorked but waiting for Dr. D exhaust. Does the BK mod work on 450's? If anyone has got the jetting down for 8000ft. I would like some info. I have seen the Larryco posts and if jetting for the 426 will work for the 450 I will go for it but I would think it would be alittle different.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ColoradoTim

Posted May 09, 2003 - 07:44 PM


I'm at 9,100 feet with a new wr450f. My latest jetting is light years ahead from stock, but it's only been tested around 50 degrees. Key: Replace needle with stock YZ450 needle and put at 4th position from top. 155 main, 42 pilot, air screw 1 3/4 turns. Pipe is SuperTrapp with 6 discs; about 96 db. What's a BK mod?


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.