8 replies to this topic
  • Wes Woodin

Posted January 01, 2010 - 12:59 PM


I'm trying to help my friend out. I bought a new 09YZ450f and went ahead and put GYTR front and rear sprockets. My friend just bought a awesome 2007 YZ250f. It needs front and rear sprockets. Will the sprockets from my 09 YZ450f fit the 07 YZ250F? It seems like it would but want to make sure before I get into it.

  • FinchFan194

Posted January 01, 2010 - 01:01 PM


Yes they will. They will fit pretty much all Yamaha full size bikes 01 and up or something like that.

  • Wes Woodin

Posted January 01, 2010 - 01:11 PM


Thanks Wes

  • grayracer513

Posted January 01, 2010 - 05:00 PM


The rear will, but the front will not.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Wes Woodin

Posted January 03, 2010 - 07:51 PM


The rear will, but the front will not.

Thanks Gray, I will tell him to order one.

  • Raider23

Posted January 04, 2010 - 10:44 AM


speaking of changing sprockets. What is the best way change the front? How do you hold it so you can get the nut off without putting it in gear and puttina a lot of stress on the internal gears.

  • grayracer513

Posted January 04, 2010 - 10:52 AM


The best way is to remove the nut while the chain is still on it, in neutral, using an impact wrench.

Failing that, the next best is to do everything as above except for the wrench, and either run a hammer handle or a piece of wood across the swing arm through the spokes, as near the rim as possible, or a stout dowel steel rod across the swing arm through a hole in the rear sprocket.

  • Wes Woodin

Posted January 04, 2010 - 06:35 PM


I heard of doing the same as keeping on chain and using the rear brake.

  • FinchFan194

Posted January 04, 2010 - 09:10 PM


Thanks Gray, I will tell him to order one.

Sorry about the bad advice man! I just bought a new front for my 08 and I could of swore it said something like 01 and up 125/250/400/426/450 but I was obviously wrong. . .

Related Content


yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.