Front wheel bearing removal


4 replies to this topic
  • NortonMoto

Posted December 18, 2009 - 08:32 PM

#1

Need some help on getting bearing out of front hub,Will tapping right bearing push out left?

  • Family Man

Posted December 18, 2009 - 08:46 PM

#2

Get a punch that is about the size of an old 3/8 inch extension and slide the space off center and tap the bearing out from the inside out. I like to press the old bearing against the new bearing and gently tap it in with a hammer, to install the new bearings. Dont hit the new bearing with a hammer.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Family Man

Posted December 18, 2009 - 08:47 PM

#3

Oh and tap it out evenly.

  • FinchFan194

Posted December 18, 2009 - 09:00 PM

#4

A dead blow hammer and some heat on the hub will make those suckers easy to get out.

  • NortonMoto

Posted December 19, 2009 - 12:09 AM

#5

Thanks for the help it worked I'm done.




Get a punch that is about the size of an old 3/8 inch extension and slide the space off center and tap the bearing out from the inside out. I like to press the old bearing against the new bearing and gently tap it in with a hammer, to install the new bearings. Dont hit the new bearing with a hammer.







Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.