00 yz426f


8 replies to this topic
  • Ealum450

Posted December 17, 2009 - 12:31 PM

#1

heres the scoop, im working on a 00 yz426 and it hasnt been cranked in over a year.. it ran perfect before we quit riding it.... So.. I cleaned out the gas tank and carb, put new plug in it, fresh 93 fuel, and check the valve lash...everything looked good.... it will run but it spits and pops like crazy.... i just dont see how it would be like that when nothing different has been done to it, its just been sitting... i did notice that the teflon coating was falling off the slide in the carb.... any help would be greatly appreciated..... thanks for your time..

  • grayracer513

Posted December 17, 2009 - 01:32 PM

#2

Crust in the pilot jet or passages.

  • Ealum450

Posted December 17, 2009 - 03:00 PM

#3

no sir, the carb is clean as a whistle...

  • mxmaddman

Posted December 17, 2009 - 03:04 PM

#4

clogged pilot like gray said. take the pilot out and shine a light through it and verify its clean again.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Ealum450

Posted December 17, 2009 - 03:55 PM

#5

every nook and cranny is clean, clean, clean.... has anyone ever had to change the vacuum release plate on the slide???

  • keegan1014

Posted December 17, 2009 - 03:58 PM

#6

if you did make sure its not upside down

  • keegan1014

Posted December 17, 2009 - 04:10 PM

#7

if you mean #11
http://fiche.ronayer...roup/CARBURETOR

  • Ealum450

Posted December 17, 2009 - 05:54 PM

#8

yes sir, its not in upside down, everytime i work on fcr carbs, i always catch myself when putting the needle valve back in to make sure i dont put it in upside down...

  • 426 NOOB

Posted December 17, 2009 - 05:57 PM

#9

I never had good luck cleaning pilot jets. Buy a new one and i guarantee it will run great





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.