Jump to content

08 yz450f rebuild


Recommended Posts

I have an 08 yz450f. I'am a vet. rider, some may have seen my riding on youtube under profile name rjcook450. The bike has 71 hrs. on it, nothing has been done to it other than spark plug replacemnet, oil changed every 5 hrs., airfilter cleaned regularly, bearings greased every year, and I have checked the valves twice, once at 40 hrs. and just recently at 70 hrs. they havent moved. They are, both Exhaust .18, both outer intakes .10 middle intake .13.

I was trading the bike in on a 2010, but until I pay off wifes wolverine, I can not afford payments, so my question is what should be done as far as rebuild. The forks and shock are being serviced. With the motor I planned on timing chain and tensioner. The mechanic said he would do a leak down test to see what might need done, if it comes out good then are the piston and rings fine or should the head be pulled to look at cylinder, or should I just have them done anyways? Anything eles that I am missing that might need done?

Thanks. Jason

Link to comment
Share on other sites

I would just rebuild the top end. Replace valve seats, timing chain, piston rings. Change oil and dismantle bike to grease all pivot points. New chain sprockets if the need it and lube all cables, change plug, m:thumbsup:aybe a new air filter. Bike will be like new and last a long time. You may want to change the oil in the front forks and rear shock.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...