Need BRP Sub Mount measurements (XRR)

Started by mikesbaron, Nov 25 2009 10:41 AM
1 reply to this topic

  • mikesbaron

Posted 25 November 2009 - 10:41 AM

#1


Need someone who has a BRP submount on their XRR:
Posted Image
I need to know what size the 2 large mounting bolts are? And then need to know the distance from the center of the two large mounting holes/bolts.

The reason being, I bought an XRR that has aftermarket upper triple and independent mounts (see below). I want to add the BRP submount and am hoping my bar clamp holes will line up or be very close to the BRP measurements so I can save on not having to buy the submount and upper triple clamp.
Posted Image

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

  • XRandWRRider

Posted 25 November 2009 - 08:55 PM

#2

Pretty sure the bolts are M12's with 17mm head size, 100mm spacing and 14mm forward offset from the steering stem hole. See my write-up HERE where I put an XRR S.U.B. mount on with my CR fork conversion.



  1. ThumperTalk
  2. → Dirt Bike
  3. → Make / Model Specific
  4. → Honda
  5. → XR600/650
If you enjoyed reading about "" here in the ThumperTalk archive\, you\'ll LOVE our community. Come join ThumperTalk today!