I am having to replacing stator cover on my 2001 DRZ-400e. Currently, I have removed old stator cover with starter motor still intact. How do I remove starter motor from the old case? I have a copy of the factory servive manual, but I cannot find any detail instructions on how to seperate starter from case. Is the motor just pressed in the case?
Starter motor removal on DRZ-400e
Started by fxrstew, Nov 20 2009 10:37 AM
4 replies to this topic
Posted 20 November 2009 - 10:37 AM
I am having to replacing stator cover on my 2001 DRZ-400e. Currently, I have removed old stator cover with starter motor still intact. How do I remove starter motor from the old case? I have a copy of the factory servive manual, but I cannot find any detail instructions on how to seperate starter from case. Is the motor just pressed in the case?
Posted 20 November 2009 - 11:26 AM
Eddie Sisneros said:
juist a o-ring holding it in.just wiggle it out.
Yup... it's a little tight. I put a little flat blade screwdriver between the starter and the housing, and gave it a nudge. It will come out. (assuming you have the 2 bolts out of the back of it)
