I need some opinions on the aftermarket tailight/signal assemblies available for the 400S. I'm tired of the looks and complete useless design of the stock unit.
Much appreciated.
Newb here.... tired of replacing rear tailight assembly.
Started by Grey Eagle, Nov 16 2009 04:09 PM
9 replies to this topic
Posted 16 November 2009 - 04:09 PM
I need some opinions on the aftermarket tailight/signal assemblies available for the 400S. I'm tired of the looks and complete useless design of the stock unit.
Much appreciated.
Posted 16 November 2009 - 04:13 PM
UFO has a nice piece with integrated turn signals. You can see mine if you view my garage
Posted 16 November 2009 - 04:38 PM
I got the Edge taillight, looks nice and clean.
www.wheelingcyclesupply.com/shop?action=category&cat_id=72
www.wheelingcyclesupply.com/shop?action=category&cat_id=72
Posted 16 November 2009 - 05:46 PM
I have the edge and it works great even offroad.....just make yourself a backing plate for your license plate as the plate will start to split:thumbsup:
Posted 16 November 2009 - 07:48 PM
How bright and noticeable are they compared to the stock billboard? I'm all for visibility and am quite convinced that more light, front and rear, means safer riding.
Ever notice the 3 headlights on fat Hawgs? I sure do more than a single beam.
Ever notice the 3 headlights on fat Hawgs? I sure do more than a single beam.
Posted 16 November 2009 - 07:50 PM
Edge tail light with 602 blinkers...bought at wheelingcyclesupply.com
Fairly bright with led's but not so bright on sunny days.
Posted 16 November 2009 - 07:54 PM
The Edge fender eliminator has the best look for sure, thats why I choose it.
Posted 16 November 2009 - 09:10 PM
EDGE here the stock tailight/flipper is a crime against the bike.
Posted 16 November 2009 - 09:24 PM
EDGE with lightworks sigs
http://www.thumperta...achmentid=27221
Make sure you get the original EDGE as it is metal, not plastic. If you need a backer plate (I suggest you do to keep your plate from cracking off) PM me.
http://www.thumperta...achmentid=27221
Make sure you get the original EDGE as it is metal, not plastic. If you need a backer plate (I suggest you do to keep your plate from cracking off) PM me.
