Boot melting



No replies to this topic
  • seadub

Posted August 23, 2000 - 04:48 AM

#1

I was melting my new Tech-8's on the Big Gun SDS head pipe. So I switched to a White Bros High Boy with the silencer, I got to be SA legal. I thought the fit was very good, and I installed a washer between the rear brake resevoir and the frame and installed a little of the heat tape. No problems so far, and no boot melting in the desert. White Bros told me to run stock jetting, I am and it is working fine. Seems like I lost a litle on the top, but the bottom and mid still seem to hit the same as the B/G. The plus is the I am SA legal and can ride in more places.





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.