07 KTM 200 xc-w Cold weather jetting.

Started by Garage_guy_chris, Nov 05 2009 05:55 PM
1 reply to this topic

  • Garage_guy_chris

Posted 05 November 2009 - 05:55 PM

#1


its getting cold up here in canada and my beloved bike isn't starting its taking 20 or so kicks to get going, its still stock pipe and everything the bike started flawlessly all summer then as its gotten cold is being a PITA the bikes running a stock setup as per the manual the jetting is as follows

Main = 162
Pilot = 42
Starter = 85
Needle = NOZF
Position = 4th
Air Screw 1 turn out

What would you guys recomend for +5 to -10 deg C or (41 to 14) F riding at about 1000ft also

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

  • XRLDTG

Posted 06 November 2009 - 11:47 AM

#2

You're going to find quicker responses over in the KTM 2 Strokes section or over at Ktmtalk.com than here. The fourstrokes get all the love in this part of the forum.

I found a wealth of knowledge over at the KTMtalk.com in regards to jetting for my 300xcw. :thumbsup:



  1. ThumperTalk
  2. → Dirt Bike
  3. → Dirt Bike Technical Forums
  4. → Intake - Jetting / Fuel Injection
If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!