104 replies to this topic

[cloudsplitter TT Bronze Member]

Eddie, I am going to be putting the Yoshi RS-4 slip on on my bike but I don't plan on changing the air filter as I think the stock one is fine,  will I still need a re-map to realize the benefits of the Yoshi or is it fine like it is..(the map)  ...??  thanks in advance..!!

[cloudsplitter TT Bronze Member]

oops, forgot to tell you what my bike is  2010 CRF250R

[matheson TT Newbie]

how do akrapovic pipes compare to other brands

[matheson TT Newbie]

I'm thinking of putting one on my sons 2010 crf250r

[GGROSS TT Newbie]

Eddie i would like to know how you would refuel for a pro-circuit pipe /cam / piston or would i be better going for a 264cc big bore or really go all out and do the lot pipe cam and big bore

[BarkerRacing753 TT Newbie]

what do you mean remove the backfire screen i thought race bikes didnt have one and if this is done i should have a remap done right?

[BarkerRacing753 TT Newbie]

eddie- what do you mean remove the backfire screen i thought race bikes didnt have one and if this is done i should have a remap done right?

[thommo59 TT Member]

The screen is the backfire screen in the airbox. Its the mesh around the air filter cage. Yes, If you remove it without doing a remap, it will run worse.

[Oddiemx TT Newbie]

Hi I have the programmer and was trying acquire some maps to try on my bike. Can you please email some for me to try.

[thommo59 TT Member]

Eddie can sell you as many maps as you need.

[bomax TT Bronze Member]

hey eddie, i have a gotten maps from you fro the 09 crf450 and have worked awesome,i have the 09 honda  controller for the 450,will this controller work with the 2010 250/450 as well or do i need to get any added adapters/softwar etc..,would like to get some maps for the 250 but want to make sure i have the right controller first.   thx

[Eddie Sisneros Get Help Now]

same controller,different software.

i can set you up with both the soft ware and maps.

[drzadam TT Silver Member]

Eddie

I came to your shop a few months back and you remapped my 10 CRF250R.  I had a notoil powerflo kit and a 4.1 FMF / powerbomb exhaust.  I have been really happy with the map.  It is the one that says 'stock; no screen' in the comments section (i have the HRC FI programmer).  I have since then gone to an akrapovic exhaust because I believed it would have better low end torque, and it definitely does.  I sold the FMF exhaust.  It was good but not the low end I wanted.  I am in the process of putting in a 13.5:1 CP piston and in a few weeks I should have the hot cams stage 1 cam for it as well.  Do you recommend a different map for that setup or should I stick with what I have from you now?  I am riding mostly at VDR and I live in Loveland, CO.  

Thanks.

[Eddie Sisneros Get Help Now]

i have another map if you want to try it since you have the tool.

email me at SSpeedWorks@gmail.com

[tidtid TT Bronze Member]

How much can the timming be advanced on a stock motor and stock pipe on 100 octane?

[oakley37 TT Member]

I second tidtid question (without screen) thanks, and would it need to be richer for a stock motor and a loudmouth filter system??

[racer77 TT Member]

Eddie, this maybe a little differant than most, but I have a 2010 crf250 on an outlaw kart, we have no noise issues and need to run a clamp type (K&N) filter. Question is what is the best power pipe, best tuner and what ever else you would recommend. Again keep in mind loud is not a problem!

Thanks

[Eddie Sisneros Get Help Now]

racer77 said:

Eddie, this maybe a little differant than most, but I have a 2010 crf250 on an outlaw kart, we have no noise issues and need to run a clamp type (K&N) filter. Question is what is the best power pipe, best tuner and what ever else you would recommend. Again keep in mind loud is not a problem!

Thanks

thanks for the call today. happy i could help.

[1snotrocket TT Member]

Thanks Eddie for the timing map.My sons 2010 crf250r rips after the change and i was able to add a little more fuel into the fuel map.I will soon be sending in another ecm to get mapped for the practice bike.

[Eddie Sisneros Get Help Now]

we appreciate the business.thank you.