Front forks blown


3 replies to this topic
  • cuaround

Posted October 29, 2009 - 06:37 PM

#1

anyone out there got a link or pics of how to replace your front fork seals on an 06 yz450f. I dont want to take it to a shop if its not to difficult to do.

Thanks

  • grayracer513

Posted October 29, 2009 - 07:18 PM

#2

There's the manual:

http://www.yamaha-mo...ice/manuals.jsp

It isn't a particularly difficult job, but you will need at least a proper octagonal wrench to remove the damper cartridge, and a seal driver. If you want do full oil change, you'll need a base valve wrench also.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • sacfelix

Posted October 29, 2009 - 07:37 PM

#3

Here is a 3 part video that shows how to replace the fork seals.

Part1

Part2

Part3
http://www.youtube.com/watch?v=YjGjSsWyMqA&feature=related

  • Family Man

Posted October 29, 2009 - 09:24 PM

#4

Go to www.Rockymountainmc.com They've got the Tusk tools and the quality how to vids. Its not a hard job, and it is one that you'll probably end up doing pretty often if you ride a lot. Worth learning how, oh and there is a great suspension section on this thumper talk site.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.