Honda

Setting 1986 trx250 timing



1 reply to this topic
  • chewy619

Posted October 19, 2007 - 06:33 AM

#1

Ok doing the top end in my quad, and get to the cam and I cant see any kind of timing marks on the sprocket, any body know what and how you set the timing, and the tourques for the head bolts and cam tower bolts?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • high_flyer_969

Posted March 10, 2008 - 05:31 PM

#2

align the t mark flywheel with the index mark on the alternator cover by turning the fly wheel clockwise. position the cam lobes down and align the timing marks on the cam sprocket with the cylinder head upper surface. torque specs for cap nuts are 25-32 ft-lb and for the socket bolts 16-20 ft-lb. straight out of the honda manual.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.