Hey guys. I have a 96 XR600 that has a baja designs kit that came with it. The guy i got the bike from disconnected the most of the wiring and now i am stuck to hook it all back together. problem is, i do not know where the 12v lead wire plugs in.
i assume it goes into the stock multi connecter but i don't know which pin.

i might just have to try and find someone to hook it up for me but i am trying to save some money. any help is greatly appreciated.

so far i know, all lights work, battery is good, 12v lead is hot with bike running

Get a schematic off of BD's site. There are 3 or 4 generations of kits, not including the dakkar kits. I just put a new one on a 650R, and there were 3 wiring harnesses. A front, mid, and rear. The front and rear connect to the mid, which connects to the DC side of the reg/rec.

bajadesigns.com

760.560.2252 ask for Diego, he can point you in the right direction:thumbsup:

+1 for above !
I bought a 06 XR-R .. in early 09.... with a BD kit in a box. from 12/05.
they were very helpful on the phone !