I got a Leo Vince X3 Slip-on on my DR-Z. And I'm looking for a header to get better performance. Been thinking about the FMF Powerbomb. But that's kinda expensive. Is i worth almost $ 200?
Or is there any other alternatives?

Christopher

Depends on which mods you have done to your bike.
You can try to get an used E-header ,but if the bike is stock ,you will not notice much gain.
It's better value for $ to do a rejet ,or go for a complete exhausts like the ssw-mrd. Freight to Norway for an exhausts system is around $100 ,so you can get a high performance system for around $550 ,which is good value for money

I only got the 3x3 mod now. Stock jetting.
When i innstalled the DJ jetkit my bike got way to much gas. So i went back to stock jetting. Got better lowend and i became more comfortable to ride with just the 3x3 mod ^^

For $ 550 i could get a bigbore kit and a Powerbomb header ;O

But the MRD/SSW is tempting.

my used SM came with a rs3 slip-on and I add a FMF strate (non Powerbomb) "E" header

it is working good but I would kill for a MRD/SSW --- just need money

and it is hard to remove a pipe that is working so good

Until I got my MRD / SSW I had mated an E model header to the stock exhaust which improved the low end torque a little. The E model header is much bigger in diameter compared to the stock sm header.

hey Clive, haven't seen you in a while. i hope all is well with you! God Bless!

I'm good and spelling as normal

thanks for the asking

been working on the never ending money pit called a turboed saturn car

and some junk little s-10s too

the one thing I rely on is that DRZ400SM with 17,000 miles on it

the only "fail" for the SM has been the clutch cable in 17,000 miles ---- it made me laph a little wile I was pushing the bike home

I have a used FMF hi flo header that I want to get rid of. Came on my new (to me) bike and I'm going to put a different exhaust on it. PM me if you're interested.