wr450 bog


2 replies to this topic
  • mineolaman

Posted September 23, 2009 - 02:44 PM

#1

Hi all, just installed a fmf powercore 4 pipe on my bike. Sounds great but when you roll the throttle back from dead idle, there is a bog. Could someone give me some advice on what i need to adjust or look for? I would desperately appreciate your help.

thanks guys,
shawn

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • yz-dwg

Posted September 23, 2009 - 03:21 PM

#2

what exhaust did you replace it with, you may be lean if you traded the stock can, that could also make it run hot, check your jetting.

  • Krannie McKranface

Posted September 23, 2009 - 06:29 PM

#3

Hi all, just installed a fmf powercore 4 pipe on my bike. Sounds great but when you roll the throttle back from dead idle, there is a bog. Could someone give me some advice on what i need to adjust or look for? I would desperately appreciate your help.

thanks guys,
shawn


You need to read the stickies and FAQ;s at the top of the forum. Much to know.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.