Gday, Im going to replace the clutch plates on my 650r. When I remove the clutch cover with the bike on the side stand will I lose any oil. Logic tells me it should be ok to leave the oil as its a dry sump motor. Is this right?

Cheers

mickoz said:

Nope,still has some oil in it,lay it on it`s side though and remove that cover and no problem:thumbsup:


Brian

and if you dont wanna lay down on side you can use a tie down hanging from your garage supports and get the bike at a 45* angle, as long as its laid over some when pulling the cover it wont come out.