are the 2000 yz426f and 2002 yz426f parts all iterchangable?

3 replies to this topic
  • bakeyz426f

Posted September 20, 2009 - 03:01 PM


thinking i could buy another 426 and use mine as spare parts or swap the motor over. is the crank the same? i know the 2000 model had stainless valves.

  • bakeyz426f

Posted September 20, 2009 - 06:31 PM


are the valves for the yz426 and wr426 interchangable? i bought the 2000 yz426 stainless valves and im thinking about getting a wr426fn. may keep the valves if they would work in the wr426f. is the wr426fn the 2002 or 2001 model? the guy that has it wants 1900 for it. since i was going to buy a wr staor for the yz and dual sport it i figured why not just get the wr426f

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • yz_for_me

Posted September 20, 2009 - 08:45 PM


99% of the parts are interchangeable. As I recall, the main differences are the stainless vs ti valves and the 2000 426 had a keyed counterbalancer shaft whereas the 2001 and 2002 had a splined cb shaft. Those are the two differences I'm aware of. There may be others.

  • 02WR426Cali

Posted September 20, 2009 - 08:55 PM


01 and 02 are the wr426. Like Yz For Me said 99% of the parts are interchangeable, actually 100% but some parts may need others to go along with them more like a team of parts rather than individual. Same goes for YZ to WR interchangeability.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.