flywheel puller


10 replies to this topic
  • tribalbc

Posted September 12, 2009 - 05:39 AM

#1

I'm looking for a source for a flywheel puller for an 07 WR450.
I'm replacing the cam chain here in a little while so I need to get one.
I can't seem to find one anywhere :busted:

  • ww44wrf450f

Posted September 12, 2009 - 06:40 AM

#2

http://www.thumperta...ad.php?t=793283

  • tribalbc

Posted September 12, 2009 - 06:51 AM

#3

http://www.thumperta...ad.php?t=793283


I guess if it comes down to it I'll go down this road but I'd rather just buy a standard $25 puller. Nice and simple.

  • SJMC_DON

Posted September 12, 2009 - 06:52 AM

#4

I got one for an 07' I believe it's a motion pro, my parts guy ordered up for me a couple years ago. I think it's the same one GSXR's use... 33mm I think.

Let me know if you need any details I can provide by looking at the tool. I don't have the original package.

Besides, thats a holder, not a puller...

  • tribalbc

Posted September 12, 2009 - 07:19 AM

#5

I got one for an 07' I believe it's a motion pro, my parts guy ordered up for me a couple years ago. I think it's the same one GSXR's use... 33mm I think.

Let me know if you need any details I can provide by looking at the tool. I don't have the original package.

Besides, thats a holder, not a puller...



Thanks Don.
Found it here, it is a 33mm.

http://www.motionpro...ha/WR_450F/all/



Now hopefully I can get my local shop to order it up for not too much of a mark up :busted:


Have you replaced your cam chain before ?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ww44wrf450f

Posted September 12, 2009 - 09:53 AM

#6

http://www.thumperta...ad.php?t=793283


http://www.gnarlypar...oducts_id=51767

$14 bucks Canadian?

  • SJMC_DON

Posted September 12, 2009 - 05:44 PM

#7

Thanks Don.
Found it here, it is a 33mm.

http://www.motionpro...ha/WR_450F/all/

Now hopefully I can get my local shop to order it up for not too much of a mark up :busted:

Have you replaced your cam chain before ?


Yeah, when I swapped cams I figured what the hell for 13 bucks, sheeez... the hardest part in my opinion, is re-installing the chain tensioner:banghead:

Have fun... have a good stock of Okeefe's on hand (Is that beer still drunk, drank, guzzled, anymore?)

When I was a kid we used to go fishing at Hi Hium, (Cache Creek, Loon Lake) and at 18 yo you could by beer in Canada... O'keefes was the good stuff back then:banana:

  • tribalbc

Posted September 12, 2009 - 07:00 PM

#8

Yeah, when I swapped cams I figured what the hell for 13 bucks, sheeez... the hardest part in my opinion, is re-installing the chain tensioner:banghead:

Have fun... have a good stock of Okeefe's on hand (Is that beer still drunk, drank, guzzled, anymore?)

When I was a kid we used to go fishing at Hi Hium, (Cache Creek, Loon Lake) and at 18 yo you could by beer in Canada... O'keefes was the good stuff back then:banana:


Well I'm on the same type of program. Replacing my piston with a HC and cams with YZ. Do the cam chain while I'm in there. I got a really good deal on a set of 08 cams so I figured I will first try it with both cams and if the E-start doesn't work than just go with the intake. I'm hoping the 08's will give me some top end and the HC piston some bottom. We'll see.....

Did you fish your new chain in with a string from the bottom or did you just drop it in from the top?

Hi Hium's a cool spot, dual sported through there years ago. I used to drink O'keefes when I was younger too, but I think that was because of the higher alcohol content, 6% :busted:
It's all about the Pilsner now :thumbsup:

  • SJMC_DON

Posted September 12, 2009 - 07:27 PM

#9

Did you fish your new chain in with a string from the bottom or did you just drop it in from the top?


I can't remember, I used the method explained to me by EL' MANUEL', I'm sure, and I think that called for dropping it in from the top?

  • tribalbc

Posted September 12, 2009 - 07:42 PM

#10

I can't remember, I used the method explained to me by EL' MANUEL', I'm sure, and I think that called for dropping it in from the top?



I can't find anything in the manual on actual cam chain replacement :busted:

I've just read Grayracers explanation.

  • SJMC_DON

Posted September 13, 2009 - 07:27 AM

#11

I've just read Grayracers explanation.


Probably better than any method explained be El' Manuel'...:busted:

I honestly can't remember how I did it and odd you can'tfdind it in the manual.

Good Luck




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.