'98YZ - Check your accelerator pump!

2 replies to this topic
  • Guest_Guest_*

Posted February 14, 2000 - 06:20 PM


When I did my Main Jet install last week I found corrortion the the shaft of my accelerator pump and the shaft was frozen. I shot it with some WD40 and worked it lose and it's working for now. I'm going to pull it apart and fix it right this week. You may want to check yours! Anybody else seen this? If so reply so we can get an idea if this is a common problem. I'd read that it was somewhere before.....


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Scott_F

Posted March 19, 2000 - 09:21 AM


Dirt and dust can get past the shaft and into the top of the diaphram. Periodic cleaning is necessary, more so in muddy conditions. Just remove the bowl and diaphram, clean and reassemble.

Scott F
'00 YZ426F
'99 YZ400F sold
'98 YZ400F sold

  • jrcgaf364

Posted January 10, 2006 - 10:57 PM


i put a spot of grease up in the boot to prevent $hit from going down in to the pump. I guess this s why they changed the carb huh?

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.